|
Smoky Mountain Woodcarvers |
 ™ |
|
|
PO BOX 82 TOWNSEND, TN 37882 800-541-5994 865-448-6350 |
||
|
Carvers Helping Carvers |
| Back to Home Page | ||
| ||
| Security Policy | ||
| EMAIL US | ||
| Shipping Policy | ||
| Popular Categories | ||
| Gift Certificates | ||
| Map to Find Us | ||
| Store Hours | ||
| Little More About Us | ||
| Carving Shows | ||
| Carving School | ||
| SCHEDULE FOR 2010 | ||
|
School Information 2011 CLASS SCHEDULE | ||
| Our Favorite Links | ||
| Carving Tips | ||
| All About Wood | ||
| Beginner Help | ||
| Carving Hints | ||
| Sharpening-How We Do It! |
THE FLEXCUT COMPANY
WILL RAISE PRICES OCTOBER 1, 2010
OUR FLEXCUT PRICES WILL SAME THE SAME OR DROP OCTOBER 1, 2010
SCROLL DOWN TO PLACE YOUR ORDER
 |
 |
| KN032 Detail Knife | KN033 Standard or Cutting Knife |
 |
 |
| KN034 Roughing Knife | KN107 Mini Detail Knife |
 |
 |
| Knife Set with Toll Roll Set includes cutting knife, detail knife, pelican knife, mini-pelican knife and tool roll. Over $80.00 value |
Right-handed Scorp Set These knives are essentially right-angled gouges designed for carving areas where the full length of a conventional gouge will not fit. Knife carvers will find them useful for hollowing deep or narrow cavities. 1/8"(3mm), 3/16"(5mm), 5/16"(8mm), 1/4"(6mm) |
 |
 |
 |
| KN039 Flexile Draw Knife with Sheath Blade is 5" L and 3/4" W Overall length is 8" - blade 1 1/4" L and approx. 1/2" W |
Flexible Draw Knife at | work |
 |
Flexible 3" Draw Knife with Sheath This handy little draw knife was developed for fan carving but works great for skinning bark and roughing-off corners. Fits nicely into the tool box. |
 |
 |
Hook Knife and Closeup of Blade
 |
 |
| KN038 Chip Carving Knife A traditional chip carving knife built with comfort and quality in mind. The high carbon blade holds an edge extremely well and can be maintained easily with simple stropping. It arrives honed, polished and ready to go. The solid ash handle is carefully shaped to provide ultimate comfort. |
KN073 Mini Chip Carving Knife With its 5/8" long, ultra thin blade, this precision cutter helps eliminate unwanted chipping in delicate spots. The small ash handle is faceted with multiple control points to allow it to be held in a variety of comfortable positions. |
| Now you can have the Flexcut quality that you enjoy in a Flexcut gouge in a knife. Same
great steel,
same great edge holding and same great cutting ability. Price is right, too.
Overall length of each knife including handle is 6". Flexcut Hook Knife - Flexcut's new hook knife allow carvers to work in hollows with ease ... by pulling the tool toward you!
|
| Detail, 1 1/4" blade | KN032 | $18.50 |  |
| Standard or cutting 1 1/4" | KN033 | $17.50 | |
| Roughing 2" blade | KN034 | $19.95 | |
| Chip Carving Knife | KN038 | $17.95 | |
| Draw Knife - Blade is 5" L x 3/4" W | KN039 | $39.95 | |
| Knife Set with Tool Roll | KN071 | $74.95 | |
| Mini Chip Carving Knife | KN073 | $20.95 | |
| Right-handed Scorp Set | KN074 | $86.95 | |
| Flexible 3" Draw Knife with Sheath | KN075 | $32.95 | |
| Hook Knife (right handed) | KN079 | $24.95 | |
| Flexcut Mini Detail Knife 3/4" Long x 1/4" Wide at widest part |
KN107 | $22.95 | |
